Tools: Cork, wax, brake retainers, vise/bench (optional)

1. Prepare skis	Install brake retainers
	Place skis in vise, base-up	Optional
	Clean bases of visible grease or dirt	Use citrus degreaser or detergent with rag; rinse off completely.
2. Apply wax	Hold wax flat against base (not like a crayon)
	Rub on firmly until a very slight layer of wax is visible
3. Rub in	Hold cork flat on base, or with full length of one edge along base. Rub with long strokes and medium pressure until all the wax is glossy and smooth.

top

back to contents

©1999-2002 Harb Ski Systems, Inc.
"PMTS", "Primary Movements", and "Primary Movements Teaching System" are trademarks of Harb Ski Systems, Inc.
"Direct Parallel" is a Registered Trademark of Harb Ski Systems, Inc.